Pallet Live Rack Push Back Pallet Rack

Product Description

Push-back pallet rack is for high density storage. The depth is usually within 5 pallet positions. The rack takes "first-in-last-out (FILO)" access mode.
Push-back pallet rack overview

Products Description

Characteristics

  • Applicable to warehouses with high cost per unit area, such as cold storage, warehouses in prime locations in downtown, etc.
  • Provide 20%-30% selectability
  • Both safety and operating efficiency are higher than drive-in racks (drive through racks).
  • Compared with adjustable pallet rack, it increases the utilization rate of the ground by about 60%.
  • It can be used with a reach forklift or a counterbalanced forklift, and the forklift operation requirements are lower than drive-in pallet rack.

Components

The main components are upright frames, beam, support rail, and carrying cart. The rack is bolted structure and easy to dismantle and install to a new place.

Components Diagram
Middle Cart
Middle Cart
Made of square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearing. Design could be different as clients' needs.
Small Cart or 1st Cart
Small Cart or 1st Cart
Made of angle steel, square tube. To save cost, the structure could be as simple as in above picture. Each has 8 bearings. Design could be different as clients' needs.
Protect Rail
Protect Rail
Made of C-shape or U-shape steel. When ground level need no carts and pallet placed directly on ground. Protect rail is recommend.

Product Information

Rack Type push back pallet rack
Rack Cost Low, Medium Low, Medium, ✓ Medium high, High, Higher
Pick-up Mode first in, last out (FILO)
Structure knock down or bolted
Forklift Aisle around 3200mm, depends on customer's forklift parameter
Load Capacity & Dimension Load capacity: ≤1500kgs/pallet
Size: customized based on clients pallet
Components Core components: frame (upright, also called column or post, bracing, base plate, fasteners), beam, support rail, cart, spacer
Other: upright protector, frame protector, guide rail, protect mesh
Core Components Specification Upright (mm): 80*60, 90*60, 90*70, 100*70, 120*95, 120*135
Beam (mm): 80*50, 100*50, 110*50, 120*50, 130*50, 140*50, 160*50
Finish Epoxy resin electrostatic spraying (powder coating), galvanized
Coating thickness no less than 60um for average thickness for powder coating
Material Q235B, or Q355
Color ral5015(sky blue), ral5005(signal blue), ral2004(pure orange), ral1003(signal yellow), ral7035(light grey)
Customized colors are available when order above 2*40gp containers

Store & Withdraw

Loading

Carrying cart runs along the inclined support rail. 1st pallet is placed on the carrying cart, 2nd pallet pushed back 1st pallet into the rack, 3rd pallet push the front 2 pallets into rack, the rest keep the same operation.

Unloading

Pallet at the pick-up end is carried out first, the next pallet slides to the pick-up point by gravity for unloading, other keep the same. Unlike drive in pallet rack, forklift truck don’t drive into the rack.

Store & Withdraw Diagram
Rack View 1 Rack View 2 Rack View 3 Rack View 4 Rack View 5 Rack View 6 Rack View 7

Our Services

Our Services

Packaging & Shipping

To suit different clients needs, HBrack use different storage method. Following are rules followed:

  • For container order: stretch film + carton board + packing belt + plywood stick + plywood pallet leg
  • For less than container order: plywood box or other that can keep the product safe during transportation
  • Other: based on clients' needs, such as vacuum packing etc.
Packaging Detail 1 Packaging Detail 2

Buying Guides

Buying Guide Step 1 Buying Guide Step 2

Company Information

Nanjing Hongbo Metal Products Co., Ltd. (hereafter mentioned as HBrack) is a company full of vitality. We are committed to providing clients with better metal products and service. HBrack has designers who have been in warehouse rack design more than 10 years. They have rich experience in complex structures.

The products provided include adjustable pallet racking, shelving, cantilever racking, drive-in racking, mezzanine floor, live racking, drawer racking, stacking rack, wire container, steel pallet, steel cage, and other warehouse storage related products.

The service provided includes storage rack design, production, and installation. The products supplied range from common pallet rack to complex mezzanine floors.

Company Facility

Frequently Asked Questions (FAQ)

Q1: Are you a factory or a trading company?
We are a factory and also engage in trading products related to warehouse racks.
Q2: Do you provide samples? Is it free or extra?
We provide sample parts free of charge; you only need to pay the freight. When a whole sample rack is needed for testing possibility, please contact us for sample cost.
Q3: Which city are you located in if I want to visit?
We are in Nanjing. When needed, we can help you book hotel and traffic tickets. We will pick you up to the destination place. We have sales personnel and a driver who will be with you during the visit, so you don't have to worry about transportation.
Q4: How experienced is HBrack in design and engineering?
HBrack has engineers who are professional in designing warehouse racks for more than 10 years and can handle everything from simple structures to complex ones.
Q5: Is my payment and order secure with HBrack?
Your money is safe with HBrack. We accept trading through 3rd party platforms. Our sales personnel have rich experience in warehouse racking, and all personal information is fully trackable.
Q6: How does HBrack help with budget control?
HBrack offers different customized designs to help clients efficiently control their overall project budget.
Contact and Navigation Banner

Related Products