Engineering Specifications

Pallet Rack Capacity Charts

Comprehensive engineering load capacity specifications for roll-formed step beams, structural steel channels, and upright frames.

Technical Compliance & E-E-A-T Standards

Rigorous Structural Engineering & Load Verification

At Plata Metal Shelving S.A., all pallet rack load capacities are calculated in strict compliance with the latest Rack Manufacturers Institute (RMI) ANSI MH16.1 specifications and the AISI Cold-Formed Steel Design Manual utilizing Load and Resistance Factor Design (LRFD) methodology.

Uniformly Distributed Loads (UDL)

All rated beam capacities assume evenly distributed static loads across the pair of beams, with each beam safely supporting exactly 50% of the total shelf weight.

Deflection Limit (L/180)

Beam load ratings strictly adhere to maximum allowable deflection limits governed by beam clear span divided by 180 ($L/180$), guaranteeing operational safety for forklift operators.

Seismic & Impact Safety Factor

Includes standard 12.5% impact allowance for side-by-side two-pallet placements. Special calculations are applied for seismic risk zones (INPRES-CIRSOC 103 / IBC).

Beam Load Ratings

Roll-Formed Step Beam Capacity Charts

RMI rated load capacity expressed in pounds (lbs) and kilograms (kg) per pair of beams based on undamaged components installed plumb.

Beam Clear Length Beam Profile & Gauge Part Number Prefix RMI Rated Capacity (Per Pair) Max Allowable Deflection
48″ (1,219 mm) 3.56″ Profile – 16 Gauge F2 / GF2 / TF2 7,991 lbs (3,624 kg) 0.266″ (6.77 mm)
60″ (1,524 mm) 3.56″ Profile – 16 Gauge F2 / GF2 / TF2 6,544 lbs (2,968 kg) 0.333″ (8.46 mm)
72″ (1,828 mm) 3.56″ Profile – 16 Gauge F2 / GF2 / TF2 5,573 lbs (2,527 kg) 0.400″ (10.16 mm)
96″ (2,438 mm) 2.50″ Profile – 16 Gauge F2 / GF2 / TF2 2,126 lbs (964 kg) 0.533″ (13.54 mm)
96″ (2,438 mm) 3.56″ Profile – 16 Gauge F2 / GF2 / TF2 3,972 lbs (1,801 kg) 0.533″ (13.54 mm)
96″ (2,438 mm) 4.18″ Profile – 16 Gauge F2 / GF2 / TF2 5,296 lbs (2,402 kg) 0.533″ (13.54 mm)
96″ (2,438 mm) 5.00″ Profile – 16 Gauge F2 / GF2 / TF2 6,730 lbs (3,052 kg) 0.533″ (13.54 mm)
96″ (2,438 mm) 6.00″ Profile – 14 Gauge F2 / GF2 / TF2 9,897 lbs (4,489 kg) 0.533″ (13.54 mm)
108″ (2,743 mm) 4.18″ Profile – 16 Gauge F2 / GF2 / TF2 4,431 lbs (2,009 kg) 0.600″ (15.24 mm)
108″ (2,743 mm) 5.00″ Profile – 14 Gauge F2 / GF2 / TF2 6,800 lbs (3,084 kg) 0.600″ (15.24 mm)
120″ (3,048 mm) 4.50″ Profile – 16 Gauge F2 / GF2 / TF2 4,254 lbs (1,929 kg) 0.666″ (16.93 mm)
120″ (3,048 mm) 6.00″ Profile – 14 Gauge F2 / GF2 / TF2 7,997 lbs (3,627 kg) 0.666″ (16.93 mm)
144″ (3,657 mm) 5.00″ Profile – 14 Gauge F2 / GF2 / TF2 4,192 lbs (1,901 kg) 0.800″ (20.32 mm)
144″ (3,657 mm) 6.00″ Profile – 12 Gauge F2 / GF2 / TF2 8,979 lbs (4,072 kg) 0.800″ (20.32 mm)
Heavy-Duty Structural Steel

Structural Channel Beam Capacity Specifications

Designed for heavy industrial loading, freezer applications, and high-impact environments. Rated per pair of beams with and without mid-span lateral ties.

Length C3 x 3.5 (No Tie) C3 x 3.5 (W/ Tie) C4 x 4.5 (No Tie) C4 x 4.5 (W/ Tie) C6 x 8.2 (No Tie) C6 x 8.2 (W/ Tie)
48″ 12,593 lbs 12,858 lbs 16,000 lbs 16,000 lbs 16,000 lbs 16,000 lbs
72″ 7,577 lbs 8,680 lbs 10,801 lbs 14,074 lbs 16,000 lbs 16,000 lbs
96″ 4,777 lbs 5,068 lbs 6,904 lbs 10,263 lbs 15,871 lbs 16,000 lbs
108″ 3,821 lbs 4,070 lbs 5,541 lbs 8,493 lbs 12,344 lbs 16,000 lbs
120″ 3,132 lbs 3,345 lbs 4,417 lbs 6,928 lbs 9,877 lbs 16,000 lbs
144″ 2,220 lbs 2,379 lbs 3,070 lbs 4,865 lbs 6,729 lbs 14,619 lbs
Upright Frame Ratings

Upright Frame Load Capacities (Unsupported Span)

Frame capacity is governed by the maximum vertical distance between beam levels (unsupported length). Figures are based on symmetrical axial loading per frame.

Max Unsupported Length 3″ x 1-5/8″ (14 Ga.) 3″ x 3″ Open (13 Ga.) 3″ x 3″ Open (10 Ga.) SuperPost 3″x3″ Closed (12 Ga.) 4″ x 3″ Closed (10 Ga.)
36″ (914 mm) 17,028 lbs 32,722 lbs 52,184 lbs 51,476 lbs 84,401 lbs
48″ (1,219 mm) 13,234 lbs 26,028 lbs 40,667 lbs 46,644 lbs 76,108 lbs
60″ (1,524 mm) 10,650 lbs 21,347 lbs 32,792 lbs 34,747 lbs 66,632 lbs
72″ (1,828 mm) 8,295 lbs 17,035 lbs 25,685 lbs 26,519 lbs 56,637 lbs
84″ (2,133 mm) 6,441 lbs 13,315 lbs 19,869 lbs 19,582 lbs 46,740 lbs
96″ (2,438 mm) 5,113 lbs 10,628 lbs 15,742 lbs 14,993 lbs 37,424 lbs

Engineering Notice & Operational Safety Criteria

Note: Frame load capacities assume undamaged, plumb installations with adequate concrete anchors (minimum 3,000 PSI concrete floor strength). If any of the following project conditions apply, direct technical review by Plata Metal Shelving S.A. engineering team is mandatory:

  • Total vertical frame load exceeds 31,000 lbs (14,060 kg).
  • Seismic spectral response acceleration $S_s$ exceeds 25%g or local seismic codes require custom baseplate engineering.
  • Single bay configurations or rack height-to-depth ratios exceeding 6:1 (requiring special floor anchoring against overturning).
Technical FAQ

Pallet Rack Load Capacity & Calculation Queries

How does pallet distribution affect rated beam capacity?

Published load tables assume a standard two-pallet placement per beam level. For three-pallet-wide beam levels, multiply rated capacities by 0.95 to account for load concentration. For single-pallet placement per shelf, apply a 0.90 multiplier.

When are lateral ties required for pallet rack beams?

Roll-formed step beams with clear spans exceeding 150 inches (3,810 mm) require mid-span lateral ties. Structural steel channel beams longer than 108 inches (2,743 mm) also require lateral ties to prevent torsional buckling under full load.

Can Plata Metal Shelving S.A. verify custom seismic load calculations?

Yes. Plata Metal Shelving S.A. provides custom structural engineering stamps, site-specific anchor embedment calculations, and INPRES-CIRSOC 103 / RMI compliant dynamic load certifications for seismic zones across Latin America and international regions.

Require Custom Capacity Calculations or Site Layout Review?

Consult directly with our structural engineering team at Plata Metal Shelving S.A. for certified load plaques and custom system design.

[email protected]
Send an Inquiry